Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Venice
If your fireplace has sat cold since last winter, or you’ve just bought a bungalow a few blocks off the beach, we can help. Chimney Sweep Mar Vista works Venice regularly, from the walk streets north of Rose to the cottages along Abbot Kinney and the older stock near Windward Circle. Salt air here does things to a chimney that inland crews don’t always check for, and those checks are half the job. Call (855) 337-2073 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Venice Homeowners Call Chimney Sweep Mar Vista for Chimney Sweep
Venice chimneys take a beating that has nothing to do with fire. The marine layer rolls in most mornings, and suspended salt settles on metal caps, dampers and flashing year-round. We plan every Venice visit around that reality rather than treating a sweep as a quick brush-and-go. Our technicians have up to 12 years of experience with coastal chimneys, and the local pro we connect you with is licensed and insured as California requires.
We see a steady stream of Venice homes where a routine cleaning turns up a seized damper or a cap that has rusted through. That’s expected in a 1930s cottage a few streets from the sand. We’d rather show you the photo than tell you about it. A camera inspection and photo report come with the work, so you can see the corrosion for yourself before anyone recommends a repair.
The local pro handles the full chimney system: sweeping, cap and crown work, chimney repair, fireplace repair and formal inspections. No second contractor, no handoff. For a Venice homeowner who has already been told the chimney “needs work” by someone with no repair capability, that matters.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Venice
Every job starts with an assessment of what the salt air has done. These are the services we handle most often in Venice.
Level 1 Inspection
A Level 1 is a visual check of the readily accessible parts of the chimney and fireplace: the firebox, damper, flue from the firebox, cap and the exterior at ground level. In Venice, we pay particular attention to the cap and damper because those are the components that fail first in a marine climate. It’s usually paired with an annual sweep.

Level 2 Inspection
A Level 2 goes further with a camera run through the flue, and it’s what we recommend whenever a Venice property changes hands, a liner is being considered, or a wood-burning fireplace has been converted to gas. Many 1920s – 1940s bungalows here have original masonry fireplaces now venting a gas appliance, and the clearances that were fine for wood aren’t necessarily correct for the new setup. The inspection documents what’s actually there. It’s also a standalone service, ready for a real estate transaction, an insurer or your own records.

Creosote Removal
Creosote builds up faster when a fire burns cool and smoky, which is common on the occasional cool Venice evening when a fire gets lit and then left to smolder. Santa Ana winds can push smoke back down the flue and leave deposits in the process. We remove glaze and soot with proper tooling rather than a quick pass, and we tell you honestly what stage the buildup is at.

Soot Removal
Soot gathers on the smoke shelf and firebox walls and dulls a fire’s draw. In the older cottages around Venice, a firebox that hasn’t been cleaned in years often carries soot mixed with crumbling mortar from a spalling firebox. We clear it out and report what the masonry looks like underneath.
Trusted Brands We Service in Venice
When a cap or damper needs replacing, the material matters more here than almost anywhere. We work with professional-grade product lines: Olympia Chimney and Famco caps and covers, HeatShield for ceramic liner resurfacing, and DuraFlex stainless liners. A stainless cap outlasts a galvanised one by a wide margin in salt air, and HeatShield restores a damaged liner without a full reline in the right conditions. We don’t claim to stock these parts on a truck. What we do is specify the right product for a Venice chimney, source it, and install it, so the choice and the fitting happen together.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Venice Homes
- Rusted or seized dampers. Constant salt spray works on the damper plate and hinge until it sticks open or shut. A damper that won’t close lets warm air out and cold air in, and one that won’t open properly starves the fire and encourages smoke.
- Corroded chimney caps. Galvanised caps pit and rust through within a few years near the beach. Once the cap fails, rain gets in, and the crown and masonry start to spall.
- Masonry clearances that no longer fit the fuel. Plenty of 1920s – 1940s bungalows were built for wood or coal and now vent gas. The original clearances may not meet what the current appliance needs, which is a hidden problem until someone looks.
- Third-degree creosote from cool, smoldering fires. Glazed creosote is harder to remove than the fluffy kind, and Santa Ana downdrafts can leave it in places a standard brush doesn’t reach. It’s the main reason we don’t treat every sweep as identical.
Pricing for Chimney Sweep in Venice, CA
Pricing here reflects both the work and the corrosion checks. A typical annual sweep and Level 1 inspection in Venice runs $180 to $350 for a standard masonry fireplace. Creosote removal is usually included in that sweep unless the buildup is heavy or glazed, in which case it runs $100 to $250 more. A standalone Level 2 inspection typically runs $250 to $500, depending on flue access and roof configuration. Cap replacement with a stainless model runs $200 to $500 installed. Nothing is recommended without camera evidence you can see for yourself, and we’ll say plainly when a repair can safely wait. The written estimate sets the final price.
We Also Serve Cities Near Venice
Venice sits in the middle of our coastal service area, so we also work the neighboring towns: Marina del Rey, Mar Vista, Santa Monica and Culver City. The salt exposure fades as you move inland, which changes how often caps and dampers need checking. Wherever you are, our chimney sweep team can assess it.
Serving Venice, CA – Our Local Coverage Area
We serve Venice and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Venice
Once a year is the right interval in Venice, and the salt air is the main reason. The salt doesn’t just affect the fire; it attacks the metal parts of the chimney all year, so the sooner a rusted cap or a stiff damper is caught, the cheaper it is to deal with. If you burn occasionally and want a check ahead of the season, that’s a fair call too. Call (855) 337-2073 for an exact quote. Estimates are free.
You can, but you’ll be replacing it again faster than you’d like. Galvanised steel corrodes quickly in Venice’s marine air, so a stainless-steel cap is the more sensible choice near the coast. We install Olympia Chimney and Famco stainless caps, and we’ll show you the difference. Call (855) 337-2073 to talk it through.
A Level 2 includes a camera inspection of the flue and a look at clearances, joints and connections, not just the visible parts. A Venice bungalow from the 1920s – 1940s often has an original masonry fireplace that’s now venting gas, and the clearances may not match the current appliance. That’s exactly what a Level 2 is built to find. Call (855) 337-2073 for pricing.
A damper that won’t move freely, sticks partway, or leaves a gap when closed is usually showing corrosion. You may also see rust on the plate or the hinge, and you may notice the fire draws poorly or smoke comes into the room. None of that should be forced by hand. Call (855) 337-2073 and we’ll take a look.
Third-degree creosote is glazed, hard and shiny, and it doesn’t come off with a standard brush. It often shows up after repeated cool, smoldering fires or in spots a downdraft has pushed smoke to. It takes proper tooling to remove, and it shouldn’t be burned off. If you’re unsure what you’re looking at, call (855) 337-2073 for an assessment.
If your Venice chimney is due for a check, or a cap is looking rough, give us a call. Call (855) 337-2073 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Mar Vista.