Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Pacific Palisades
Pacific Palisades homes tend to have more chimney than the average house down the hill: a masonry fireplace in the living room, a second one in a den or primary suite, sometimes a gas insert added during a remodel, and a set of flues running up through one stack. That changes how cap and crown work gets done. We handle the chimney cap & crown side of the system for Pacific Palisades homeowners who want the top of the chimney sealed and protected before the wet weather and the Santa Ana winds arrive. Call (855) 337-2073 to set an estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Pacific Palisades Homeowners Call Chimney Sweep Mar Vista for Chimney Cap & Crown
Hillside lots are the norm here, and so are steep roofs, narrow driveways, and chimney stacks that sit well above the roofline. Getting to the top of a chimney safely on a Pacific Palisades property is part of the job, and it takes access planning before anyone sets a ladder. Our technicians have up to 12 years of experience and know how a canyon-and-bluff property changes the approach.
We’re a chimney and fireplace specialist, not a general home-repair company. Sweeping, inspection, cap and crown work, and chimney repair all run through one company, so you’re not coordinating a roofer, a mason, and a sweep for a single leak. We install and work with Olympia Chimney and Famco caps, HeatShield for liner restoration, and Gelco, and we can document everything with a standalone inspection that’s useful for a real estate transaction or an insurer.
Response time to Pacific Palisades is quick. We answer 24/7 and dispatch Sunday through Friday, 7am to 7pm. The work is booked around the fire season and the wet season, not the clock, so if you call in a quiet stretch you’ll usually get on the schedule fast.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Pacific Palisades
Cap Installation in Pacific Palisades
A chimney cap is the stainless-steel-and-mesh lid that keeps rain, birds, and debris out of a flue. On a Pacific Palisades ranch or Spanish-style home with an original masonry fireplace, the cap also has to be sized to the flue tile, not to whatever the hardware store sells on the shelf. We fit Olympia Chimney and Famco caps sized to the actual opening.

Cap Replacement in Pacific Palisades
Older caps rust, mesh tears away from the frame, and spark arrestors disappear through a decade of dry rot and wind. A missing spark arrestor mesh on an original 1950s or 1960s cap is one of the most common things we find in Pacific Palisades before fall. Replacing the cap is usually the cheapest way to keep birds and debris from blocking draft.

Crown Repair in Pacific Palisades
The crown is the concrete or mortar slab on top of the chimney that sheds water away from the flue. Hairline cracks from wet winters let water track into clay tile flues that were often never relined, softening mortar joints and causing spalling in the firebox. We re-bed and rebuild crowns where the damage is structural.

Crown Coating in Pacific Palisades
Where the crown is sound but the surface has cracked, a flexible crown coating is the less invasive option. It seals the top of the stack without a full rebuild and holds up against the mild, wet winters this part of the canyon gets. Coating is the right call when hairline cracks have opened but the concrete itself is still solid.
Trusted Brands We Service in Pacific Palisades
We work with professional chimney product lines rather than generic hardware-store material. That means Olympia Chimney and Famco caps and covers, HeatShield for liner restoration, Gelco, and DuraFlex components where a full reline is needed. For prefabricated metal fireplaces in the newer custom rebuilds around Pacific Palisades, we fit factory-matched caps so the draft and the seal hold. We don’t stock parts in a warehouse here; product selection and installation are lined up together so you’re not waiting on a quote-then-order cycle. Call for a free estimate if you want to know which cap design fits your stack.
Common Chimney Cap & Crown Problems We See in Pacific Palisades Homes
- Wet-winter sludge. Rainwater gets through a hairline-cracked crown, mixes with soot and creosote, and turns a routine sweep into a sludge-removal job. It’s a different cleaning approach than dry brush work.
- Missing or rusted spark arrestor mesh. Older caps lose their mesh to wind and age, letting birds and debris in. Blocked draft adds to creosote buildup right before the Santa Ana wind season.
- Single-flue caps on multi-fireplace homes. Many mid-century Pacific Palisades houses have one cap covering one flue while a secondary fireplace flue sits open. The uncapped flue takes on water and sludge.
- Mismatched aftermarket caps on prefabricated chimneys. Newer custom rebuilds here often have a factory-built metal fireplace, and a wrong-sized aftermarket cap is a common source of leaks and poor draft.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Pacific Palisades, CA
Estimates in Pacific Palisades run higher than some nearby flat-lot neighborhoods because access on hillside properties takes more setup. A typical single-flue cap installation in Pacific Palisades runs $250 – $475. Cap replacement on a rusted original runs $225 – $425. Crown repair with mortar rebuild runs $450 – $900 depending on size and access. Crown coating with a flexible sealant runs $375 – $725. Multi-flue caps on a two- or three-flue stack run $450 – $950. Custom caps for prefabricated metal chimneys run $350 – $800. The written estimate sets the final price, and the estimate is free.
We Also Serve Cities Near Pacific Palisades
Cap and crown work also goes out to Pacific Palisades neighbors in Santa Monica, Brentwood, Westwood, and Venice. The housing stock shifts block by block, but the problem is the same: a top of the stack that wasn’t sealed properly and is now letting water where it shouldn’t. Call and we’ll book the closest opening on the schedule.
Serving Pacific Palisades, CA – Our Local Coverage Area
We serve Pacific Palisades and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Pacific Palisades
Yes. A multi-flue cap covers every flue in the stack with one lid, so the uncapped secondary fireplace flues on a mid-century ranch or Spanish-style home stop taking on water. A single-flue cap only protects one flue and leaves the rest open to rain, birds, and debris. We size the multi-flue cap to the actual footprint of the stack, not to a stock size. Call (855) 337-2073 and we’ll quote it on the estimate.
Usually a cracked crown or a missing spark arrestor. Water enters through the top, mixes with soot and creosote, and turns into a heavy sludge that can stain the smoke chamber and damper. In Pacific Palisades this is a wet-winter problem, not just a fire-season one. The fix is to re-bed or coat the crown, fit a properly sized cap with stainless mesh, and sweep the flue to clear the wet residue. Call for an estimate.
If the concrete is sound and the damage is hairline cracks on the surface, coating with a flexible sealant is the right call. If the crown has crumbled edges, separated from the flue tile, or no longer slopes to shed water, it needs a repair with fresh mortar. We make that call on site with the crown in front of us, and the estimate is free. Call (855) 337-2073 to book it.
Yes. Prefabricated metal fireplaces need a factory-matched cap, and an aftermarket cap that doesn’t match the chimney is a common source of leaks and poor draft. We work with Olympia Chimney and Famco cap lines that fit metal chimney systems. The cap is sized to the exact pipe and termination on your rebuild. Call for an estimate; we quote it on the spot.
Because the crown and cap age whether the fireplace is used or not. Rain, wind, and decades of wet winters crack crowns and rust spark arrestors on Pacific Palisades homes, and none of that shows from inside the house. An annual inspection documents the condition of the crown, cap, and flues, and gives you a written record for insurance or a real estate transaction.
Book a Chimney Cap & Crown Estimate in Pacific Palisades
A house with several flues needs the top of the stack handled as one system, not as a single flue at a time. Whether it’s a multi-flue cap on a 1960s ranch, a crown rebuild on a Spanish-style, or a custom cap on a newer prefabricated chimney, the job starts with a look at the crown and every flue. Call (855) 337-2073 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the price is set per job by the written estimate.
Written by the team at Chimney Sweep Mar Vista.