Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Brentwood
If you live in Brentwood and your chimney cap has rusted through or your crown is cracking, you’ve found the right place. We handle the full chimney system for Brentwood homeowners, from the spark arrestor on top down to the smoke chamber, and cap and crown work is one of the things we do most. Brentwood is a short run for us, so getting a technician out to look at a damaged crown or a mismatched cap doesn’t take long. Homes at the canyon edge and along the hillside streets here have chimneys that work harder than most, and the right cap and crown matter more than people expect. Call (855) 337-2073 and we’ll set up a free estimate.
Why Brentwood Homeowners Call Chimney Sweep Mar Vista for Chimney Cap & Crown
Brentwood homeowners tend to call us for the same reason: they want a chimney specialist who can diagnose the whole system, not a sweep who stops at the flue brush. We work across Brentwood regularly, and we’ve built a strong local reputation by showing people the camera evidence before recommending anything. If a cap is serviceable, we say so. If a crown needs a rebuild, we explain what failed and why. That approach earns repeat work and referrals around here.
We answer 24/7 on the phone line, and fast dispatch runs 7am to 7pm, Sunday through Friday. We’re closed Saturday. Our technicians have up to 12 years of experience on masonry and factory-built chimneys, and they know the difference between a mid-century ranch flue and a later rebuild. When it’s time to book, call (855) 337-2073.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Brentwood
Cap and crown work is the top of the chimney, but it decides how the whole flue behaves. Here’s what we handle for Brentwood properties, and what each job usually involves.
Cap Installation in Brentwood
A properly sized cap keeps rain, leaf litter and animals out of the flue while letting smoke escape cleanly. On canyon-edge homes in Brentwood, the cap also carries the spark arrestor that keeps embers off the brush. We install Olympia Chimney and Famco caps sized to the flue, and we handle sourcing and installation together so you’re not waiting on a quote-then-order process.

Cap Replacement in Brentwood
When a cap has rusted at the seams, lost its screen, or sits loose at the flashing, replacement is usually the practical answer. Oversized caps on exterior hillside chimneys are a common find here: they let wind-driven rain in and corrode where they meet the flue. We match the replacement to the actual flue dimensions, not whatever’s on the shelf.

Crown Repair in Brentwood
The crown is the concrete cap at the top of the masonry that sheds water away from the flue. When it cracks or spalls, water gets into the liner and smoke chamber, and the homeowner often only notices a draft problem. Crown repair on the older clay-tile chimneys around Brentwood needs a careful hand so the original tile isn’t damaged in the process. We rebuild the crown to shed water properly, then reseal the flashing while we’re up there.

Crown Coating in Brentwood
For crowns that are structurally sound but showing hairline cracks, a flexible crown coating is often the right call. It bridges the small cracks before they open into the masonry below. Gelco crown coating is one of the products we use for this. If the crown has already failed badly, we’ll tell you plainly, because coating a broken crown just delays the repair.
When a crown and a clogged arrestor fail together, the whole assembly needs attention. That’s where our chimney cap & crown team comes in, doing repair and rebuild on the same visit.
Trusted Brands We Service in Brentwood
We work with professional-grade product lines rather than generic hardware-store materials. That includes Olympia Chimney and Famco caps and covers, Gelco for crown coating, HeatShield for liner restoration where the flue surface has broken down, and DuraFlex and Copperfield for liner systems when a rebuild is needed. Sourcing and installation are handled together, and we don’t claim to stock parts locally; the right product is ordered to fit your flue and installed when it arrives. Chimney work done with a product the trade trusts holds up better against the seasonal swings we see in Brentwood.
Common Chimney Cap & Crown Problems We See in Brentwood Homes
Brentwood’s mix of canyon-edge properties, hillside lots and mid-century ranches produces a fairly consistent set of cap and crown failures. Here’s what turns up most.
- Cracked and spalled crowns on mid-century masonry chimneys. The concrete crown on a 1930s to 1960s ranch cracks as it ages, and water gets past it into the flue liner and smoke chamber. Homeowners usually notice a draft or a smoky fireplace long before they notice the crown itself.
- Clogged spark arrestors and torn cap screens. On canyon-edge homes, screen openings pack with leaf litter and bird nesting material. That turns a routine sweep into a wildfire-safety repair, especially before the dry Santa Ana wind periods.
- Oversized or mismatched caps on exterior hillside chimneys. A cap that’s too big for the flue lets wind-driven rain in and corrodes at the flashing. Over time it works loose and the draft gets worse.
- Heavier creosote loading from serious wood heat. Brentwood homes that run wood as a real heat source through the cool months build creosote in the clay-tile flue far faster than a decorative fireplace would. A cap and crown on good repair is what keeps that heavier load from meeting wind-driven brush.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Brentwood, CA
Pricing here is set per job by the written estimate, and the estimate itself is free. Typical ranges for the Brentwood market:
| Service | Typical estimated range |
|---|---|
| Cap installation (single flue, Olympia or Famco) | $220 – $420 |
| Cap replacement (matching new dimensions) | $240 – $450 |
| Crown repair (rebuild crown, reseal flashing) | $450 – $900 |
| Crown coating (Gelco, structurally sound crown) | $300 – $600 |
| Multi-flue or custom cap | $450 – $950 |
Cost is driven by how many flues the cap covers, whether the crown is a coating job or a full rebuild, and how much flashing work is involved. A cracked crown on a simple masonry chimney sits at the lower end; a custom cap on a two-flue exterior hillside chimney sits higher. The written estimate sets the final price, so you know it before any work starts.
We Also Serve Cities Near Brentwood
Brentwood is one of the places we work most, and we cover the surrounding areas too: Westwood, Santa Monica, Pacific Palisades and Beverly Hills. If your chimney is on the canyon edge or further into the flats, a cap and crown assessment is a free estimate either way. Call (855) 337-2073 to book.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Brentwood
When wood is your primary heat, the flue should be swept more often than the once-a-year calendar rule suggests. In Brentwood, the safe interval is really measured in how much you burn, not in years. Heavy winter use loads creosote faster, especially in an original clay-tile flue. We’ll assess buildup during the inspection and tell you the interval that fits your burning. Call (855) 337-2073 for an exact quote, and estimates are free.
Yes, and it’s one of the most overlooked pieces of wildfire defense on a canyon-edge home. A correctly sized cap carries the spark arrestor that keeps embers off the brush, and an intact screen stops leaf litter and bird nesting material from packing it. When the screen is torn or clogged, embers and debris have an easier path. We’ll check the cap and arrestor and tell you plainly what needs replacing.
Usually yes, with care. Crown repair on an original clay-tile flue around Brentwood means working around the tile without cracking it, so we inspect the liner first and approach it non-destructively. The crown gets rebuilt to shed water properly and the flashing sealed while we’re up there. If the liner has already been damaged by water past a failed crown, we’ll show you the camera evidence before recommending anything. Call (855) 337-2073 for an exact quote, and estimates are free.
Crown coating is for crowns that are structurally sound but showing hairline cracks. A flexible coating like Gelco bridges those cracks before they open into the masonry. Full crown repair is for crowns that have already cracked or spalled badly enough to let water in; that’s a rebuild, not a coat. If the structure is gone, a coating just delays the real fix.
A custom cap is worth it when the stock multi-flue option doesn’t match the flue spacing or leaves gaps at the flashing. On an exterior hillside chimney, wind-driven rain is the main concern, so a cap that seals to the crown properly and fits both flues matters. We’ll measure the top and tell you which option fits, then source and install it. Call (855) 337-2073 for a free estimate.
Book Your Brentwood Chimney Cap & Crown Estimate
If a cap has rusted, a crown is cracking, or you just want a second opinion on work someone else recommended, call (855) 337-2073 for a free estimate. We’ll inspect, show you the findings, and quote the work in writing before anything starts. A cap and crown in good repair is what keeps a Brentwood chimney drawing properly and ready for the fire season. We answer 24/7. Fast dispatch runs 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
Written by the team at Chimney Sweep Mar Vista.