Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Mar Vista Homeowners
A chimney inspection in Mar Vista gives you a documented, camera-verified picture of what’s actually inside your flue – not a guess, and not an upsell. Most homeowners here only think about the chimney when something smells off, when smoke backs into the living room, or when a buyer’s inspector flags it during a sale. Our technicians have up to 12 years of experience reading exactly those signals. We handle the full chimney system, from the flue and damper up through the crown and cap, using trade-trusted brands like HeatShield, Olympia Chimney, Famco, and Gelco. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday, so a same-day inspection is often possible when you call in the morning. Reach us at (855) 337-2073.
What Our Chimney Inspection Service Includes
An inspection isn’t one thing. How deep we go depends on what you need it for – a routine seasonal check looks different from a real estate transaction or a post-chimney-fire evaluation. Here’s how we break it down.
Level 1 Inspection
A Level 1 inspection is the basic visual check you’d get alongside an annual sweep, covering all readily accessible parts of the chimney and firebox. It’s the right call when your setup hasn’t changed and you just want confirmation the flue is clear and the joints look sound. We check the firebox, damper, smoke chamber, flue interior as far as we can see, and the exterior cap and crown, then tell you plainly what we found and whether it can wait.
Level 2 Inspection
A Level 2 inspection goes further, using a camera to examine the full flue interior, and it’s what you need after a chimney fire, a change in fuel type or appliance, or when a property changes hands. This is the level most real estate and insurance situations call for. We run the camera the length of the flue, check for cracks, gaps, and liner deterioration, and document everything with photos you keep for your records.
Level 3 Inspection
A Level 3 inspection is the most involved and is only warranted when a serious hazard is suspected in a concealed area – think damage to the chimney structure itself or a problem behind a wall. It can require opening up access to parts of the chimney that aren’t normally visible. We only recommend this level when a Level 1 or Level 2 has given us a real reason to look further, and we explain exactly why before any work begins.
Camera Inspection
A camera inspection lets us see the inside of your flue the way you never could from the hearth, catching hairline cracks and gaps that a visual check from below would miss. It’s built into our Level 2 work and available on its own when you want a second opinion on a repair someone else recommended. We show you the footage as we go, so you’re looking at the same thing we are. Call chimney inspection to book a camera check.
Flue Inspection
A focused flue inspection zeroes in on the passage your smoke actually travels through, checking for blockages, creosote buildup, and a liner that’s no longer doing its job. This matters most for wood-burning fireplaces that see steady seasonal use. If the flue is compromised, we can talk through restoration with HeatShield, a ceramic resurfacing system that rebuilds a damaged liner without pulling the whole thing out.
Real Estate Inspection
A real estate inspection gives buyers, sellers, and agents a written, documented assessment of the chimney as part of a transaction. It’s a standalone service – you don’t need a cleaning booked to get one. We provide the photos and findings in a format you can hand straight to your agent or insurer, and we’re happy to walk a buyer through what we found.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Inspection
We work with a defined set of professional-grade product lines rather than whatever’s on the hardware-store shelf, and that knowledge shapes how we inspect. When we look at a flue lined with a DuraFlex system, we know how those liners are joined and where they tend to fail first. We’re also trained in HeatShield application for liner restoration and know when resurfacing is the honest answer versus when a full reline is the safer call. On the cap and crown side, we install Olympia Chimney and Famco caps and covers, so we read their condition with an eye to what’s actually repairable.
Gelco products come up often in crown repair and sealing work, and knowing the material helps us judge whether a crown is failing or just weathered. Whether your chimney carries a HeatShield-restored liner, an Olympia Chimney cap, or a Famco cover, our inspection accounts for what’s installed above and inside. And whether you have one of those brands or any other make, we can help. If you’re in a neighboring area, a chimney inspection works the same way.
Signs You Need Chimney Inspection Right Now
Chimneys fail quietly. The list below covers the signals that should move an inspection to the front of your mind rather than next season’s to-do list.
- Smoke backing into the room. Smoke that rolls out instead of drawing up the flue usually points to a blockage, a damper problem, or a flue that’s the wrong size for the fireplace. It’s an easy thing to dismiss as weather, but it often signals something the camera will catch.
- A strong creosote smell, especially in warm weather. Creosote buildup that gets pungent when it’s hot outside means there’s a real layer of combustible residue inside the flue. That buildup is the fuel for chimney fires, so it’s worth inspecting before the next burning season.
- Visible cracks in the firebox or missing mortar joints. Cracks in the firebox brickwork or crumbling mortar let heat and gases reach areas they shouldn’t. A camera inspection tells us how far the damage runs before it spreads.
- Water stains or rust on the damper or firebox. Moisture getting past a failing crown or cap shows up as staining, rust, or a musty smell. Left alone, it degrades the liner and the masonry around it.
- A recent chimney fire or a change in what you burn. Even a small chimney fire can crack a liner you can’t see from below, and switching fuel types or appliances changes what the flue needs to handle. Both are textbook reasons for a Level 2 inspection.
Our Chimney Inspection Process – Step by Step
Here’s how an inspection actually runs, from the first call to the report in your hands.
- 1
We talk through what’s going on. Before anyone gets on a roof, we ask what you’ve noticed, how you use the fireplace, and whether this inspection is for safety, a sale, or insurance. That conversation sets the right level of inspection and keeps you from paying for more than the situation needs.
- 2
We protect the space and check the accessible parts. Inside, we lay down drop cloths, inspect the firebox, damper, smoke chamber, and the flue as far as we can reach, and check the cap and crown from the roof or from a safe vantage. We’re checking for blockages, cracked liners, and a crown that’s letting water in.
- 3
We run the camera. For a Level 2, a camera goes the full length of the flue, and we watch the footage together so you’re seeing the same cracks and gaps we are. This is the part that turns “your chimney needs work” into evidence you can judge for yourself.
- 4
We document everything. We photograph what we find and put the findings in writing, ready for your records, your agent, or your insurer. Nothing gets recommended without the images to back it up.
- 5
We walk you through it and tell you what can wait. We explain what we found, what’s safe to leave alone, and what genuinely shouldn’t be put off. If repair is needed, we do that work ourselves – the same company handles sweeping, caps, crowns, chimney repair, and fireplace repair, so you’re not calling a second contractor to finish the job.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Inspection Cost in Mar Vista?
A chimney inspection in Mar Vista typically runs from about $150 to $450 depending on the level and what’s found. A Level 1 inspection usually sits at the low end, in the $150 – $250 range. A Level 2 with a full camera sweep of the flue generally runs $250 – $450, and a standalone real estate inspection lands in a similar band because of the documentation involved. A Level 3 inspection is priced per job once we know what access the chimney requires, and we give you that number before any work begins.
What moves the price: how accessible the flue is, whether the roof is steep or the chimney is hard to reach, how much buildup or damage the camera reveals, and whether you need the written report for a transaction. To avoid overpaying, ask for the inspection level up front and ask to see the camera footage – any recommendation should be something you can watch for yourself. Our estimates are free, and the written estimate sets the final price. Call (855) 337-2073 for an exact quote.
Chimney Inspection Near Mar Vista – Our Service Area
We cover Mar Vista and the neighborhoods around it, including Culver City, Venice, Marina del Rey, Westchester, Ladera Heights, Santa Monica, Westwood, View Park-Windsor Hills, Brentwood, Beverly Hills, and Inglewood. Where you are shapes how quickly we can book you in, and we’ll confirm the earliest opening when you call. If you’re just across the line, a chimney inspection covers the same ground. For routine sweeping alongside the inspection, see Chimney Sweep Mar Vista.
Serving Mar Vista, CA – Our Local Coverage Area
We serve Mar Vista and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Inspection in Mar Vista
A chimney inspection is an assessment of the chimney’s condition, from the firebox and damper up through the flue, crown, and cap, using visual checks and, at Level 2 and above, a camera run through the flue. It tells you whether your chimney is safe to use and documents any damage in photos. It’s separate from a sweep, which removes creosote; an inspection tells you what condition the chimney is in. Call (855) 337-2073 for an exact quote.
A Level 1 inspection usually takes about 30 to 45 minutes, while a Level 2 with a camera typically runs an hour to 90 minutes. A real estate inspection may take a bit longer if documentation needs to be thorough for a transaction. The time depends on access and what we find once we’re looking. Call (855) 337-2073 and we’ll give you a realistic window when we book.
Most inspections in Mar Vista run about $150 to $450, with a Level 1 at the lower end and a Level 2 camera inspection or real estate report higher. What you pay depends on the inspection level, roof access, and what the camera reveals. The written estimate sets the final price, and the estimate itself is free. Call (855) 337-2073 for an exact quote.
Yes. We’re trained in HeatShield liner restoration and install Olympia Chimney and Famco caps and covers, so an inspection that finds a worn liner or a failing cap is something we can follow through on. We also work with Gelco and DuraFlex products. That means one company can inspect, restore, and repair rather than handing you off. Call (855) 337-2073 to book.
Same-day inspections are often possible when you call in the morning. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. We’re closed Saturday. Call (855) 337-2073 to check availability.
Our inspection reports stand on their own as documentation of what we found on the day. Any repair or restoration we recommend – a HeatShield relining, a new cap, crown work – gets a written estimate with the terms spelled out before you commit. We won’t quote a warranty we can’t confirm in writing. Ask us about the specifics when we’re on site, or call (855) 337-2073.
Clear the area around the hearth and make sure we can reach the fireplace, and hold off on lighting a fire for at least 24 hours beforehand so the flue is cool. If you have prior inspection reports or repair receipts, have them handy – they help us compare. Tell us up front if it’s for a sale or insurance so we prepare the right documentation. Call (855) 337-2073 with any questions before we arrive.
Schedule Your Chimney Inspection Service in Mar Vista Today
Whether you want a routine check before burning season, a documented report for a sale, or a straight answer on a repair someone else recommended, a Mar Vista chimney inspection gives you the evidence. Our technicians have up to 12 years of experience, we handle the full chimney system with brands like HeatShield and Olympia Chimney, and the estimate is free. Call (855) 337-2073. We answer 24/7.
Written by the team at Chimney Sweep Mar Vista.