Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Mar Vista Homeowners
Mar Vista’s housing stock dates mostly to the 1940s and 1950s, and that matters more than most homeowners realize. The brick chimneys built in that era were laid with mortar that hardens, cracks, and slowly lets water in, and once water is inside the masonry the damage spreads quietly. By the time a homeowner notices a stain on the firebox or a chunk of brick on the roof, the repair has usually moved past a simple patch.
We handle the full chimney system, not just the sweep. Our technicians have up to 12 years of experience, we work with professional-grade brands like HeatShield, Gelco, Olympia Chimney, and Famco rather than hardware-store substitutes, and we can often get a repair scheduled the same day. Call (855) 337-2073 for a free estimate.
Key Takeaways
- Chimney repair in Mar Vista covers mortar repointing, spalling brick, waterproofing, flashing, rebuilding, and tuckpointing.
- Typical repairs run from a few hundred dollars for small mortar work to several thousand for a partial rebuild.
- Our technicians have up to 12 years of experience with masonry and liner systems.
- We answer 24/7 and offer fast dispatch from 7am to 7pm, Sunday through Friday.
- Every estimate is free and the written estimate sets the final price.
What Our Chimney Repair Service Includes
Repair is a broad word, and it covers a lot of different work on a chimney. Here’s what each part actually means and when you’d need it.
Mortar Repointing
Repointing is renewal of the mortar joints between bricks, usually on the upper sections of the chimney where weather hits hardest. You need it when joints have receded, turned sandy, or started to crumble, because that’s the point where water finds its way behind the brick face. We cut out the failed mortar to a proper depth and repack it with fresh material matched to the original joint profile, so the repair holds instead of sitting on the surface.
Spalling Brick Repair
Spalling is when the face of a brick flakes off or pops away, often leaving a rough, crumbly surface behind. It usually signals water getting into the masonry and expanding as it dries, and once it starts on one brick it tends to spread to its neighbors. We remove the damaged brick, match the replacement as closely as we can to the existing color and dimensions, and set it properly so the wall stays sound.
Chimney Waterproofing
Waterproofing is a breathable treatment applied to the exterior masonry so rain runs off instead of soaking in. You need it when the brick and mortar look sound but the chimney keeps showing damp patches or efflorescence, the white powdery staining that tells you moisture is moving through the wall. We use a vapor-permeable product, because sealing masonry with something that traps moisture does more harm than good.
Flashing Repair
Flashing is the metal that seals the joint where the chimney meets the roof, and it’s the most common source of leaks that get blamed on the chimney itself. You need flashing work when you see water staining on the ceiling near the chimney, rusted or lifting metal, or gaps in the sealant at the roof line. We remove failing flashing, rework the step and counter-flashing, and seal it so the roof and chimney move independently without opening a gap.
Chimney Rebuilding
Rebuilding means taking down the damaged portion of the chimney, usually the top few courses above the roofline, and constructing it again with new brick and mortar. It’s the right call when the masonry has moved, when a large section of brick has failed, or when the crown has separated and the top is no longer stable. We rebuild to match the original footprint and appearance where possible, cap it properly, and make sure the flue inside is supported and sealed.
Tuckpointing
Tuckpointing is the finer version of repointing: cutting out old mortar and replacing it with a finished joint that’s neat, uniform, and matched to the brick. You want it when joints are intact but ugly, or when previous patching was done badly and the chimney looks patched rather than repaired. We grind out the old material cleanly and finish the joints so the repair reads as original masonry, which matters if you’re preparing a house for a real estate inspection.
If the diagnosis turns out to be more than masonry, our chimney repair service also covers the crown, cap, and firebox.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Repair
We work with HeatShield, the ceramic resurfacing system used to restore a damaged liner from the inside without tearing the chimney apart. It’s the right answer when the flue has cracks or gaps in the clay but the surrounding masonry is still sound, and it saves homeowners from a full reline. We also install Gelco and Olympia Chimney products, including caps and covers, which means product selection and installation happen in a single visit rather than a quote-then-order-then-return process.
Famco is another line we install regularly, and we know where each of these systems wears and what to check when something goes wrong. None of this means we’re locked into one brand. Whether you have HeatShield, Gelco, Olympia Chimney, Famco, or any other make, we can help.
Signs You Need Chimney Repair Right Now
- Crumbling mortar between bricks. If the joints look sandy or you can scrape mortar away with a screwdriver, water is already getting in. Addressing it now is far cheaper than rebuilding later.
- White staining or dark damp patches on the exterior. Efflorescence or persistent dampness means moisture is moving through the masonry. Waterproofing and repointing usually solve it before the brick itself fails.
- Brick flakes on the roof or in the yard. Falling brick faces point to spalling, and spalling tends to accelerate. Have it looked at before the next rainy season.
- Water stains on the ceiling near the chimney. That’s usually flashing, not the flue, and it can soak insulation and framing if it goes unaddressed. A camera inspection tells you exactly where it’s coming from.
- A chimney that leans or has visible cracks running through the brick. Movement in the masonry is a structural concern and shouldn’t wait. Get an inspection before the next storm season.
Our Chimney Repair Process – Step by Step
- 1
We start with a full inspection. That means looking at the exterior masonry, the crown, the cap, the flashing, and the firebox, plus a camera inspection of the flue so we can see the liner condition from the inside. Anything we recommend, you’ll see in the camera footage and photos yourself.
- 2
We explain what we found and what it means. If the chimney can safely wait, we tell you. Not every cracked joint needs immediate work, and we’d rather give you a straight answer than sell you a repair you don’t need yet.
- 3
You get a written estimate with a flat price. The price is agreed before any work begins, so there’s no surprise on the invoice. The written estimate sets the final price.
- 4
We do the repair with matched materials. Mortar is matched to the existing joint profile, brick is matched to the original where possible, and we use professional-grade products like HeatShield for liner work rather than generic substitutes.
- 5
We check our own work and leave you the documentation. After the repair we re-check the joints, the cap, and the seal, and you get photos of the finished work. If you need records for insurance or a real estate transaction, we can provide a formal inspection report.
For routine sweeping alongside a repair, see our Chimney Sweep Mar Vista page.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Mar Vista?
Chimney repair pricing depends mostly on how much masonry is involved and how far the water damage has gone. A small repointing job on the upper joints is at the low end; a partial rebuild above the roofline is at the high end. Here are typical ranges for the work we do most often in Mar Vista:
| Repair | Typical Range | What Drives the Price |
|---|---|---|
| Mortar repointing (partial) | $350 – $900 | Height of the chimney, number of joints, access |
| Tuckpointing (full face) | $600 – $1,400 | Square footage of masonry, joint finish detail |
| Spalling brick repair | $400 – $1,200 | Number of bricks replaced, color matching |
| Chimney waterproofing | $300 – $700 | Surface area, product type, prep work |
| Flashing repair | $400 – $1,000 | Roof pitch, flashing style, extent of removal |
| Chimney rebuilding (partial) | $2,500 – $6,500 | Height above roofline, brick matching, flue support |
Those ranges are estimates, not quotes. The written estimate after inspection is what sets the final price. What tends to push a job higher: a tall chimney, a steep roof that needs extra staging, a brick that has to be color matched, and repairs that uncover more damage than the camera or the visual inspection showed. You avoid overpaying by getting the camera inspection first and seeing the evidence for yourself, and by knowing which repairs can wait. Every estimate we give is free and includes photos and the camera footage.
Chimney Repair Near Mar Vista – Our Service Area
We serve Mar Vista and the surrounding neighborhoods, including Culver City, Venice, Marina del Rey, Westchester, and Santa Monica. If you’re on the other side of the 405, we also cover Ladera Heights, View Park-Windsor Hills, Westwood, Brentwood, Beverly Hills, and Inglewood. Dispatch runs from 7am to 7pm, Sunday through Friday, and most Mar Vista addresses can be reached the same day when the schedule allows. For nearby work, see our chimney repair page for Culver City and our chimney repair page for Venice.
Serving Mar Vista, CA – Our Local Coverage Area
We serve Mar Vista and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Repair in Mar Vista
Chimney repair covers any work needed to fix the chimney structure itself: the masonry, the mortar joints, the crown, the flashing where it meets the roof, and the flue liner. It’s separate from a sweep, which cleans the flue, and separate from a cap installation, which is a protective fitting on top. Most repair work falls into mortar repointing, brick replacement, waterproofing, flashing, or rebuilding.
Most repairs take a single visit of a few hours, including repointing, waterproofing, flashing repair, and small brick replacements. A larger job like a partial rebuild can take two to three days depending on weather and the extent of the masonry involved. We tell you the expected timeline in the written estimate so you can plan around it.
Typical repair work in Mar Vista runs from about $300 for a small waterproofing job to $6,500 for a partial rebuild, with most common repairs landing between $400 and $1,400. Final pricing depends on the size of the chimney, access, and how much damage the inspection reveals. Call (855) 337-2073 for an exact quote. Estimates are free.
Yes, we install and work with HeatShield for liner restoration and Olympia Chimney and Famco for caps and covers, along with Gelco products. We know where these systems wear and what to check when something fails. If your chimney has a different brand installed, we can still inspect it and tell you what condition it’s in.
Same-day repair is often possible when the job is small and the schedule allows. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. If a call comes outside dispatch hours, we book it into the next opening rather than leaving you waiting for a callback.
Warranty terms depend on the type of repair and the products installed, and we spell them out in the written estimate before any work begins. Masonry repairs and product-backed work like HeatShield applications typically carry different terms. Ask us to walk through the warranty on your specific job before you approve it.
Clear access to the fireplace and hearth inside, and make sure the gate or side yard access is unlocked if we need the exterior. Move anything fragile away from the hearth, and cover furniture nearby if you’re concerned about dust. We bring drop cloths and clean up after ourselves. If you have previous inspection reports or photos, have them on hand, as they help us compare condition over time.
Schedule Your Chimney Repair Service in Mar Vista Today
Chimney damage gets worse with every rainy season, and the repair gets more expensive the longer it waits. Call (855) 337-2073 to book a free estimate with camera inspection and a photo report of everything we find. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The written estimate sets the final price, and nothing is recommended without evidence you can see for yourself.
Written by the team at Chimney Sweep Mar Vista.