Chimney Liner & Rebuild Cost in Mar Vista - You See the Footage Before You Get a Price

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (855) 337-2073

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate
Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Chimney Liner & Rebuild Cost in Mar Vista?

Chimney liner work in Mar Vista typically costs between $1,800 and $4,500 for a full stainless reline, while a HeatShield restoration of an existing clay liner usually runs $1,200 to $2,800. A partial chimney rebuild (the part above the roofline) commonly lands between $3,500 and $9,500, and a full rebuild from the foundation up can reach $12,000 or more. The written estimate sets the final price, and we don’t charge for that estimate.

Every number below reflects how a job usually goes in a 1950s-and-60s Southern California ranch house, which is most of what stands in Mar Vista. Tick these figures against your own property: whether the flue is tile-lined, how much tuckpointing the masonry needs, and whether a previous owner fitted a gas insert into a wood flue (common around here) all move the total.

Key Takeaways

  • Full stainless reline: roughly $1,800-$4,500, based on flue height and diameter.
  • HeatShield ceramic restoration: roughly $1,200-$2,800 and often avoids a full reline.
  • Partial rebuild above the roofline: roughly $3,500-$9,500.
  • Full foundation-up rebuild: $12,000 and up.
  • Every price is set per job by a free written estimate.

Chimney Liner & Rebuild Cost Breakdown (2026)

We break the estimate into line items so you can see exactly where the money lands. Below are typical ranges for the Mar Vista market this year.

Item Typical 2026 Range Notes
HeatShield liner restoration $1,200-$2,800 Ceramic resurfacing of a sound clay liner, no full reline
Full stainless reline (DuraFlex) $1,800-$4,500 Insulated flex liner sized to the flue, full length
Liner inspection & documentation $150-$450 Standalone inspection for real estate or insurance
Crown rebuild $500-$1,400 New poured or formed crown, proper overhang and bond break
Chimney cap (Olympia, Famco) $180-$650 installed Multi-flue or single-flue stainless cap with screen
Tuckpointing / mortar repair $600-$2,500 Based on square footage of joint repointing
Partial rebuild (above roofline) $3,500-$9,500 Rebuild the section that clears the roof
Full chimney rebuild $12,000+ Foundation-up rebuild with new liner and cap

What pushes a job toward the high end? A tall two-story run costs more than a single-story flue because there’s more liner. An offset flue (where the chimney jogs sideways inside the wall) takes more time to line cleanly. Cracks running through the tile call for a full reline and rule out HeatShield. And if the damage is below the roof, the rebuild isn’t a repair, it’s a rebuild, and the price reflects real masonry. On the lower side: a sound clay liner that just needs ceramic resurfacing, a single-story flue with a straight run, and a crown that’s intact all keep the number down. For a fuller picture of how a reline or rebuild is scoped, see chimney liner & rebuild.

What Affects Chimney Liner & Rebuild Pricing in Mar Vista

  • Flue height and run. A one-story flue needs less DuraFlex liner than a two-story run, and liner is priced by the foot. A straight flue lines faster than one with an offset, which changes labor as much as material.
  • Liner condition and material. A cracked or spalled clay liner needs a full reline; a structurally sound one can usually be restored with HeatShield. That single determination moves a job between the $1,200 and $4,500 ranges fast.
  • Masonry damage below the crown. Cracks, spalling brick, or a crown that’s pulled away from the flue add tuckpointing or a crown rebuild to the estimate. If the moisture has worked into the shoulder of the chimney, it becomes a partial rebuild.
  • Gas insert retrofits. In Mar Vista’s older tract homes, a gas insert dropped into a wood-burning flue is common, and the old flue is sometimes undersized or unlined for the appliance. Correcting that is a reline, not a patch.
  • The dry, warm local climate is forgiving but not invisible. Mar Vista sees little rain, but the rain it does get hits hard when it comes, and a bad crown lets water straight into the masonry. UV exposure also ages an unlined cap fast. A failing cap or crown left alone can turn a liner job into a rebuild.
  • Access and roof type. A flat or low-pitch section can be easier to work over than a steep tile roof, and a chimney crowded against a neighboring wall takes more careful staging. Both shift labor, not material.

Repair or Replace: Which Makes Sense in Mar Vista?

If the liner is cracked but the brickwork is sound, restoration usually wins. HeatShield resurfacing runs $1,200-$2,800 and brings the flue back into service without pulling the old liner, which is the cheaper path by a clear margin. A full reline at $1,800-$4,500 makes sense when the existing tile is displaced or the flue was never properly lined. A rebuild at $3,500-$9,500 or more only enters the picture when the masonry itself has failed, not just the liner.

One judgment call matters most here: whether the liner can be restored or must be replaced. That’s not a guess from the ground. It comes from an inspection of the flue interior, and it’s the difference between a HeatShield job and a reline. We do both, so the recommendation follows the condition of your chimney rather than the service we happen to offer.

The rebuild question gets asked most often by people moving through a sale. If a buyer’s inspector flags the chimney, a documented standalone inspection tells you what’s actually wrong before anyone reaches for a $10,000 number. Call (855) 337-2073 to book one.

How to Save on Chimney Liner & Rebuild

Getting the diagnosis right the first time is the biggest saving. A sound clay liner that gets HeatShield instead of a full reline generally comes out several thousand dollars ahead. A failing crown caught early, rebuilt for $500-$1,400, spares you the masonry moisture damage that turns a repair into a partial rebuild later. Keeping a proper stainless cap on the flue (Olympia Chimney and Famco caps run $180-$650 installed) keeps rain, birds, and debris out, which protects the liner between seasons.

A few practical steps:

  • Get a standalone inspection before committing to a rebuild. It’s $150-$450 and it tells you whether the damage is above or below the roofline.
  • If you’re selling, order the inspection early. Documented condition beats a last-minute scramble after the buyer’s report lands.
  • Bundle cap and crown work into one visit rather than splitting it across two, since we source and install Olympia and Famco caps on the same call.
  • Ask specifically whether HeatShield applies to your liner. If it does, you may not need a full reline at all.

Estimates are free, so there’s no cost to finding out where your chimney actually stands. Call (855) 337-2073.

What’s a Chimney Liner, and Why Does It Cost What It Does?

A liner is the flue’s inner wall. It carries smoke and gases up and out and keeps heat away from the wood framing and masonry. In Mar Vista’s older homes the original liner is usually clay tile, and clay cracks. When it does, the flue is no longer compliant for a wood fire, and the fix is either resurfacing the intact liner (HeatShield) or installing a new stainless flex liner (DuraFlex) sized to the appliance.

The cost is mostly material plus height. A DuraFlex liner is cut to the flue’s length and diameter, and taller flues need more of it. Labor is the other half, and a straight flue lines far quicker than one with an offset. That’s the whole reason a reline on one house can run $1,800 and another $4,500.

What Does a Chimney Rebuild Actually Involve?

A rebuild happens when the masonry is beyond patching. A partial rebuild replaces the section above the roofline; a full rebuild goes down to the foundation. Both re-form the flue, reset or replace the crown, and finish with a new cap and liner. The price is driven by how much masonry is replaced, whether the flue needs a new liner, and how hard the access is. If you’ve been told the chimney “needs work,” this is the number to scrutinize. A second opinion that actually does rebuilds, not just sweeps, is worth having before you sign anything.

Why Use a Chimney Specialist for Liner and Rebuild Work

Liner restoration and rebuilding sit at the technical end of chimney work, and they call for someone who does it as a specialty rather than a sideline. We work with six professional product lines: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. We’re HeatShield-certified for liner restoration, and we source and install Olympia and Famco caps so selection and fitting happen on one visit. Our technicians have up to 12 years of experience, and we handle sweeping, inspection, cap and crown, chimney repair, and fireplace repair in-house. One call covers the whole system. You can start with a routine chimney sweep Mar Vista and let the inspection drive the rest.

FAQs – Chimney Liner & Rebuild Cost

How much does a chimney liner cost in Mar Vista?

A full stainless reline in Mar Vista typically costs $1,800-$4,500, and HeatShield restoration of a sound liner runs $1,200-$2,800. The exact figure depends on flue height, diameter, and whether the existing tile can be resurfaced. Call (855) 337-2073 for a free estimate.

Is it cheaper to restore my liner with HeatShield or do a full reline?

HeatShield restoration is usually the cheaper route at $1,200-$2,800 versus $1,800-$4,500 for a full reline. It works only when the existing clay liner is structurally sound, though. An inspection tells you which path applies. Call (855) 337-2073 and we’ll check before recommending either.

How much does a chimney rebuild cost in Mar Vista?

A partial rebuild above the roofline runs roughly $3,500-$9,500, and a full foundation-up rebuild starts around $12,000. The split depends on whether the damage sits above or below the roof. Call (855) 337-2073 for a free written estimate on your chimney.

Can you come today?

We offer same-day service where the schedule allows. Call (855) 337-2073. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.

Do I need a liner inspection before a rebuild?

Yes, and it typically costs $150-$450. A standalone inspection shows whether the damage is limited to the liner or has moved into the masonry, which decides between a $1,200 repair and a $12,000 rebuild. Call (855) 337-2073 to book one; estimates are free.

Get a Free Liner & Rebuild Estimate in Mar Vista

Liner and rebuild prices come down to the condition of your specific flue and masonry, and you can’t read that from the ground. We handle the entire chimney system, from the sweep to the crown, and we’ll tell you plainly whether you’re looking at a HeatShield restoration, a full reline, or a rebuild. Call (855) 337-2073 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Written by the team at Chimney Sweep Mar Vista.

Pricing reflects the Mar Vista market as of 2026. Chimney Sweep Mar Vista offers free estimates – call (855) 337-2073.

What Our Customers Say

★★★★★ 4.9 from 11+ reviews

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

- Maya Shah

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

- Sofia Mendoza

"Quiet, polite, worked straight through, was gone in under two hours. My kids were napping and he was careful about it without me even mentioning it."

- Matt Parker
Need Chimney Cleaning help in Mar Vista? Licensed & insured · free written estimates
Call (855) 337-2073

Request a Free Estimate

Tell us what's going on in Mar Vista. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7
Local Service Coverage
Chimney Sweep Mar VistaChimney Sweep Culver CityChimney Sweep VeniceChimney Sweep Marina del ReyChimney Sweep WestchesterChimney Sweep Ladera HeightsChimney Sweep Santa MonicaChimney Sweep WestwoodChimney Sweep View Park-Windsor HillsChimney Sweep BrentwoodChimney Sweep Beverly HillsChimney Sweep InglewoodChimney Sweep LennoxChimney Sweep Mid-CityChimney Sweep Pacific PalisadesChimney Sweep El SegundoChimney Cap & Crown Mar VistaChimney Cap & Crown Culver CityChimney Cap & Crown VeniceChimney Cap & Crown Marina del ReyChimney Cap & Crown WestchesterChimney Cap & Crown Ladera HeightsChimney Cap & Crown Santa MonicaChimney Cap & Crown WestwoodChimney Cap & Crown View Park-Windsor HillsChimney Cap & Crown BrentwoodChimney Cap & Crown Beverly HillsChimney Cap & Crown InglewoodChimney Cap & Crown LennoxChimney Cap & Crown Mid-CityChimney Cap & Crown Pacific PalisadesChimney Cap & Crown El SegundoFireplace Repair Mar VistaFireplace Repair Culver CityFireplace Repair VeniceFireplace Repair Marina del ReyFireplace Repair WestchesterFireplace Repair Ladera HeightsFireplace Repair Santa MonicaFireplace Repair WestwoodFireplace Repair View Park-Windsor HillsFireplace Repair BrentwoodFireplace Repair Beverly HillsFireplace Repair InglewoodFireplace Repair LennoxFireplace Repair Mid-CityFireplace Repair Pacific PalisadesFireplace Repair El SegundoChimney Repair Mar VistaChimney Repair Culver CityChimney Repair VeniceChimney Repair Marina del ReyChimney Repair WestchesterChimney Repair Ladera HeightsChimney Repair Santa MonicaChimney Repair WestwoodChimney Repair View Park-Windsor HillsChimney Repair BrentwoodChimney Repair Beverly HillsChimney Repair InglewoodChimney Repair LennoxChimney Repair Mid-CityChimney Repair Pacific PalisadesChimney Repair El SegundoChimney Inspection Mar VistaChimney Inspection Culver CityChimney Inspection VeniceChimney Inspection Marina del ReyChimney Inspection WestchesterChimney Inspection Ladera HeightsChimney Inspection Santa MonicaChimney Inspection WestwoodChimney Inspection View Park-Windsor HillsChimney Inspection BrentwoodChimney Inspection Beverly HillsChimney Inspection InglewoodChimney Inspection LennoxChimney Inspection Mid-CityChimney Inspection Pacific PalisadesChimney Inspection El Segundo
Call Now - We Answer 24/7