Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Inglewood
If your fireplace smokes, smells damp after rain, or hasn’t been looked at in years, you’re in the right place. We repair fireplaces across Inglewood, from the older bungalows on the tree-lined streets to the postwar homes near the 405. Our technicians have up to 12 years of experience with brick-and-mortar chimneys, clay flue tiles, and the gas inserts added to them later. One call covers the whole system: diagnosis, repair, and inspection, no second contractor. Call (855) 337-2073 for a free estimate.
Why Inglewood Homeowners Call Chimney Sweep Mar Vista for Fireplace Repair
Inglewood’s fireplaces get a different kind of wear than the ones in colder parts of the country. We know that, and we plan our work around it. Most of what we find here is structural and moisture-related, not heavy soot, and our recommendations follow what the camera actually shows.
We work on fireplace repair for homeowners across Inglewood, and we hear the same story repeatedly: another service said the chimney “needs work,” but nobody showed the evidence. We don’t operate that way. Every job starts with a Level 2 inspection and a camera view of the flue liner and smoke chamber, and you see what we see before anything is quoted.
Every recommendation is yours to weigh. If the crown is cracked but the liner is sound, we’ll tell you. If the flue is fine and the smoking is a damper problem, that’s what we’ll quote. Our technicians have up to 12 years of experience diagnosing these systems, and the products we install are trade-trusted brands like HeatShield, Gelco, and DuraFlex, not hardware-store substitutes.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Fireplace Repair Services in Inglewood
We handle the full fireplace system, not just the sweep. Here’s what we work on most often in Inglewood.
Gas Fireplace Repair
Many Inglewood homes have a gas insert or a factory-built gas fireplace added long after the original chimney went up. When the flame won’t light, burns unevenly, or the pilot keeps going out, the problem usually sits in the burner, the valve, or the venting. We test the components and check that the venting matches the appliance before recommending parts.

Wood Burning Fireplace Repair
An original wood-burning fireplace in a 1920s to 1950s Inglewood bungalow was built before today’s liner standards. If yours smokes, drafts poorly, or the firebox masonry is cracking, we inspect the flue and smoke chamber first. Repairs range from re-sealing the firebox to restoring the liner, depending on what the camera shows.

Fireplace Insert Service
A 1960s-era prefab insert pushed into a stack that was never designed for it creates a mismatch: the flue is the wrong size for the appliance, and the damper won’t seal around it. That combination kills draft and pushes smoke into the room. We check the venting, review the liner connection, and correct the fit. This is the fix that actually solves a smoking insert.

Damper Repair
A damper that won’t open fully chokes the fire; one that won’t close lets warm air and rain straight up the flue and back into the room. We repair or replace dampers, particularly in older Inglewood fireplaces where the housing has warped or rusted from moisture. When the damper is sound, the room drafts the way it should.
Firebox Repair
Spalling and cracking in the firebox brick is one of the most common calls we get in Inglewood. Where the heat has broken down the mortar or the brick faces are flaking, we rebuild the firebox and re-point the joints. If a HeatShield application suits the firebox, we use it to restore the surface without a full rebuild.
Trusted Brands We Service in Inglewood
When a repair needs a product, we use the professional-grade brands that chimney specialists trust: DuraFlex liner systems, HeatShield ceramic resurfacing for liner restoration, Gelco, and Olympia Chimney and Famco caps. HeatShield is often the right choice where the clay tile is intact enough to restore rather than reline, a less invasive option that a sweep-only operation can’t offer. We source the product and install it as part of the repair, so you’re not dealing with a quote-then-order delay. What gets installed stays matched to the flue and your appliance.
See the difference
Before
After
Before
After
Before
AfterCommon Fireplace Repair Problems We See in Inglewood Homes
Because so many Inglewood chimneys go decades without inspection, the failure here is usually structural masonry rather than a dirty flue. Here’s what that looks like in practice.
- Cracked chimney crown and failed flashing. A crown that’s developed hairline cracks lets rain into an uncapped or clay-tile flue. Water soaks into the mortar and brick, and the firebox smells damp often after a heavy rain event.
- Spalled brick and mortar joints. With almost no freeze-thaw, Inglewood’s chimneys age from moisture and seismic movement rather than cold. The result is flaky brick faces, crumbling joints, and a slowly loosening stack.
- Palm frond debris and birds’ nests. On tree-lined blocks, an uncapped chimney pot collects palm fronds, grit, and nesting material, which kills draft and pushes smoke back into the room. A screen cap from Olympia Chimney or Famco prevents the problem.
- Mismatched inserts and liners. A gas insert or 1960s-era prefab added to a stack never designed for it leaves a liner size mismatch and a damper that won’t seal. The fire burns poorly and the fireplace smokes.
Pricing for Fireplace Repair in Inglewood, CA
Pricing is set per job by the written estimate, and the estimate is free. Here are typical ranges for the Inglewood market:
- A Level 2 camera inspection with documentation: $150 – $300.
- Damper repair or replacement: $180 – $450.
- Firebox repair and re-pointing: $400 – $1,200.
- Crown and flashing repair: $350 – $900.
- HeatShield liner restoration: $1,200 – $2,500.
- Full relining with DuraFlex: $2,500 – $5,000.
What moves the price is the condition of the crown, the extent of the masonry damage, and whether the liner needs restoration or full relining. The written estimate, based on the camera inspection, sets the final price. Nothing gets recommended without you seeing the footage first.
We Also Serve Cities Near Inglewood
If you’re just outside Inglewood, we still cover your area. We serve homeowners in Lennox, El Segundo, Westchester, and View Park-Windsor Hills. The same camera-first, evidence-based approach applies in every city we work in. Call (855) 337-2073 and tell us where you are.
Serving Inglewood, CA – Our Local Coverage Area
We serve Inglewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in Inglewood
The wind pressure from a Santa Ana event can reverse the draft in an older chimney, especially if the cap is missing or debris is blocking the flue. A screen cap and a clear flue usually solve it. If that doesn’t, the real cause is often a flue that’s too small for the appliance or a damper that won’t seal. Call (855) 337-2073 for an estimate.
Not automatically. If the camera shows the clay tile is intact and only the firebox or smoke chamber needs attention, HeatShield restoration is often enough. You only need a full reline if the tile is cracked or spalling. We show you the footage before recommending either. Call (855) 337-2073 for an estimate.
Moisture, not cold. Inglewood’s dry climate has almost no freeze-thaw, so the damage comes from rain getting into uncapped crowns and cracked joints after a heavy winter rain season. Once water works into the brick and mortar, the faces flake and the joints crumble. A crown and cap repair prevents further damage. Call (855) 337-2073 for an estimate.
Sometimes, but only if the flue is the right size and the liner is compatible. A 1960s-era prefab pushed into a stack never designed for it is exactly the mismatch that causes smoking and poor drafting. We inspect the flue and venting to confirm the fit before any install. Call (855) 337-2073 for an estimate.
Every year or two, even if you only burn on a few nights. The climate barely stresses the chimney from cold, so the risk here is moisture and seismic movement quietly cracking the crown and masonry. A camera inspection catches it early, before the damage spreads. Call (855) 337-2073 to schedule one.
Want a straight answer about the fireplace in your Inglewood home? Call (855) 337-2073 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Mar Vista.