Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Beverly Hills
Fireplace repair in Beverly Hills is driven less by heavy burning than by time, salt air, and the standards a high-value estate has to meet. Most homes here run decorative or gas-fired fireplaces that sit idle through AQMD no-burn days, so the failures we fix are usually quiet ones: a rusted cap on a stucco stack, a hairline crown crack letting water in, a damper that won’t seat. We’re a chimney and fireplace specialty company, and Beverly Hills is one of the communities we cover across the Westside. Call (855) 337-2073 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Beverly Hills Homeowners Call Chimney Sweep Mar Vista for Fireplace Repair
Beverly Hills homeowners tend to call us after someone else has told them their chimney “needs work” without showing them why. Our answer is camera evidence and a written estimate, agreed before any job is booked, so you can see what failed and decide what to do about it.
We work exclusively on chimney and fireplace systems, not general home repair, which matters on the Revival-style masonry and stucco stacks that define so much of this city. Our technicians have up to 12 years of experience, and we work with trade-trusted lines like DuraFlex, HeatShield, Olympia Chimney, and Gelco rather than whatever the nearest hardware aisle stocks.
For homes near the flats off Santa Monica Blvd and the estates up in the hills, that combination of local building knowledge and specialty parts is the difference between a patch and a fix. We can work with your insurer when documentation is needed, and inspections stand alone if that’s all you need.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Fireplace Repair Services in Beverly Hills
We handle the full fireplace system, from the gas valve to the cap on the roof. Here’s what comes up most on Beverly Hills properties.
Gas Fireplace Repair
Gas set failures in Beverly Hills often surface as a weak or non-existent flame, a pilot that won’t stay lit, or a burner with blocked ports after a long idle season. We test the valve, ignition, and venting as a system rather than guessing at one part. Because so many local fireplaces are decorative, a gas repair here is frequently the only real service the unit has had in years.

Wood Burning Fireplace Repair
Wood-burning fireplaces in the older estates around Beverly Hills can develop cracked firebox brick, loose mortar joints, and damaged dampers after decades of intermittent use. We assess the firebox and flue for heat damage and draft issues before recommending any masonry rebuild. Where the firebox needs resurfacing rather than rebuilding, HeatShield gives us a less invasive route.

Fireplace Insert Service
Inserts need proper clearances and a sound liner to vent safely, and we check both before touching the unit itself. On renovated Beverly Hills homes, an insert added during a remodel sometimes vents through a flue that was never upsized for it, which is worth verifying. We service the insert and the liner connection together so nothing is left half-addressed.

Damper Repair
A damper that won’t close is one of the most common calls we get in Beverly Hills, because an open damper on an idle fireplace lets canyon downdrafts and warm interior air move freely. We free stuck dampers, replace failed ones, and fit the correct size so it seals. That single repair often solves a draft complaint that looks like something bigger.
Trusted Brands We Service in Beverly Hills
We install and work with professional-grade chimney products, including DuraFlex liner systems, HeatShield ceramic resurfacing, Olympia Chimney caps, and Gelco sealants. What that means for a Beverly Hills homeowner is product selection and installation handled in one visit, not a quote followed by a wait for parts to be ordered. When a cap or crown is the issue, we bring the right component and fit it correctly the first time rather than substituting a general-purpose part that fails again in a couple of seasons.
See the difference
Before
After
Before
After
Before
AfterCommon Fireplace Repair Problems We See in Beverly Hills Homes
- Rusted caps and flashing. Salt-laden marine air off the coast pits galvanized steel long before the flue liner shows any wear, and rusted flashing at the roofline lets water track into the smoke chamber. A stainless cap and re-sealed flashing stop the cycle.
- Hairline-cracked crowns. The concrete crown on a 1920s or 1930s Revival-style masonry chimney cracks as it ages, and because the fireplace rarely burns, that slow water intrusion hides for years. Rebuilding the crown is usually the fix.
- Downdrafts above Sunset. Hillside chimneys sit at or below the roof ridge facing the canyon, so smoke and cold air push back down the flue. A debris-screen check and cap adjustment often resolves it; sometimes it’s a draft problem, not a repair.
- Idle gas inserts. Decorative inserts that go unused for months can develop sticky valves and blocked burner ports. A service check and damper inspection catches it before the first cold evening.
Pricing for Fireplace Repair in Beverly Hills, CA
Pricing is set per job by a written estimate, and the estimate is free. A typical damper repair in Beverly Hills runs $150 – $350. Gas fireplace repair, including pilot and valve work, typically runs $200 – $450, and firebox repair or resurfacing usually lands between $500 – $1,800 depending on the extent of the masonry. Chimney cap replacement with a stainless unit generally runs $250 – $600, and crown rebuilds fall in the $400 – $1,200 range. Higher-cost jobs usually involve more masonry and roofline access, not harder labor. Nothing is recommended without camera evidence you can see, and we’ll tell you plainly when a repair can safely wait.
We Also Serve Cities Near Beverly Hills
Our team covers Beverly Hills and the communities around it, including Westwood, Mid-City, Culver City, and Brentwood. The same salt-air corrosion and idle-fireplace issues show up across the Westside, and the approach is the same. If you’re near the edge of the city line, call and we’ll confirm coverage.
Serving Beverly Hills, CA – Our Local Coverage Area
We serve Beverly Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in Beverly Hills
Salt-laden marine air off the coast corrodes galvanized caps and flashing faster than the dry inland air does, and burning wood has nothing to do with it. The corrosion happens whether the fireplace is idle or not. Replacing the cap with a stainless unit ends the cycle. Call (855) 337-2073 for an exact quote – estimates are free.
Yes. An annual NFPA 211 inspection catches the problems that build silently between rare burns – a cracked crown, rusted flashing, a debris screen clogged by canyon downdrafts. Idle fireplaces hide damage better than heavily used ones. A Level 1 or Level 2 inspection documents what’s actually there. Call (855) 337-2073 to book one.
A Level 1 is a basic visual check of the accessible parts, a Level 2 adds a camera inspection of the flue, and a Level 3 opens up concealed areas when a problem demands it. For a routine Beverly Hills home, a Level 1 or Level 2 usually covers it, while a Level 2 is the standard for insurance and resale documentation. Call (855) 337-2073 for a free estimate on what your home needs.
It’s often a draft problem, not a repair. Hillside chimneys that sit at or below the roof ridge facing the canyon catch downdrafts and clogged debris screens rather than soot buildup. We inspect the cap, screen, and flue to find out what’s actually causing it, then tell you whether a fix is warranted. Call (855) 337-2073 for an exact quote.
When a no-burn alert is issued, wood burning is restricted, so the fire stays off – and that makes your inspection more important, not less. An idle fireplace still develops crown cracks and corrosion between seasons, so an annual check is how you know it’s safe when a burn day does arrive. A qualified local pro can document condition and flag anything unsafe. Call (855) 337-2073 to schedule.
If your fireplace needs a diagnosis you can trust, our fireplace repair team is ready to help. Call (855) 337-2073 for a free estimate – we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Mar Vista.